The energy storage heating device is electricity as a heat source, using nighttime low valley low-cost electricity (22:00~5:00 or 22:00~6:00), wind power or solar power, using the heat pipe as the medium, during the grid trough The high specific heat metal solid storage alloy module is heated as a heat medium, and stored in a heat accumulator body at a temperature of up to 750 degrees，and the heat exchange speed is controlled by a computer to achieve the purpose of controlling the heat dissipation temperature for the purpose of Users use it all day, so as to save operating expenses.
At present, there are several major products of 380V, 10KV and 35KV!
The solid energy storage heating device automatically turns off the power at the peak and time of the power grid, and the heat stored in the solid heat storage module exchanges heat with water (or oil) to provide the hot air (400 degrees below) and heat required by the customer，Oil (300 degrees or less) and hot water (85 degrees or less). Since the energy storage heating device only uses low-cost valley electricity at night, it will greatly reduce the operating cost of the customer. The cost of providing the same heat is 40%~50% of the direct-heating boiler; 60%~70% of the natural gas is used; It is 35% of diesel used.