
The energy storage and heating device uses electricity as the heat source
Release Time:
2018-08-21
The energy storage and heating device uses electricity as a heat source, utilizing cheap electricity (22:00-5:00 or 22:00-6:00), wind power, or solar power generated during the night's low valleys, using heat pipes as the medium, to heat metal solid energy storage alloy modules with high specific heat during the low valleys of the power grid, and store them in a heat accumulator at a temperature of up to 750 degrees Celsius. The computer controls the heat exchange rate to achieve the purpose of controlling the heat dissipation temperature for users to use throughout the day, Thereby achieving the goal of saving operating expenses.

The energy storage and heating device uses electricity as a heat source, utilizing cheap electricity (22:00-5:00 or 22:00-6:00), wind power, or solar power generated during the night's low valleys, using heat pipes as the medium, to heat metal solid energy storage alloy modules with high specific heat during the low valleys of the power grid, and store them in a heat accumulator at a temperature of up to 750 degrees Celsius. The computer controls the heat exchange rate to achieve the purpose of controlling the heat dissipation temperature for users to use throughout the day, Thereby achieving the goal of saving operating expenses.
Currently, there are several major categories of products including 380V, 10KV, and 35KV!
The solid energy storage heating device automatically shuts off the power supply during peak and peacetime periods of the power grid, and exchanges heat stored in the solid heat storage module with water (or oil) for heating. It can provide customers with the required hot air (below 400 degrees Celsius), hot oil (below 300 degrees Celsius), and hot water (below 85 degrees Celsius). As the energy storage heating device only uses low valley power at night, it will greatly reduce the operating costs of customers. The cost of providing the same amount of heat is 40% to 50% of that of direct heating civil boilers; 60% to 70% of natural gas used; Is 35% of diesel fuel used.
Related News