Tell us about the three main technological points of electric steam furnace heating


Release Time:

2022-07-25

Some users who have been using electric heating boilers for a period of time report that the equipment is not working well, which means that the work efficiency has decreased. What should be done to deal with this situation? At this time, what we usually need to do is grasp some correct operating methods and usage methods, and play its role through accurate understanding of the equipment. Let's take a brief look at its three main operating processes.

Tell us about the three main technological points of electric steam furnace heating

Tell us about the three main technological points of electric steam furnace heating

Some users who have been using electric heating boilers for a period of time report that the equipment is not working well, which means that the work efficiency has decreased. What should be done to deal with this situation? At this time, what we usually need to do is grasp some correct operating methods and usage methods, and play its role through accurate understanding of the equipment. Let's take a brief look at its three main operating processes.

wrdaS8eIRaaJlIQ1HCME6g.jpg

 

"Fuel is burned in the furnace, and its chemical storage energy is released in the form of heat energy, which allows the flame and combustion products (flue gas and ash) to have a high temperature. The working medium, such as feedwater (or backwater), enters an electrically heated boiler and is supplied in the form of steam (or hot water).".

"High temperature flames and smoke transfer heat to the working medium (heat medium) through the" heating surface ". Fuels such as coal are burned in the furnace. After combustion, the combustible part and the original moisture are converted into smoke, and the original ash is retained as ash.".

When the working medium (heat medium) is heated, its temperature rises or vaporizes into saturated steam, or is further heated into superheated steam. Air is sent into the furnace, where oxygen participates in combustion reactions. Excess air and inert gases remaining in the reaction are mixed and discharged in the flue gas.

Therefore, when applying electric heating boilers, we should operate according to corresponding working methods and requirements to ensure the improvement of their use effect. Moreover, each operation process of the equipment has certain requirements and rules, and we need to make relevant preparations and inspections before using the equipment.

Power-saving tips for electric steam furnaces

Electric steam furnaces inevitably consume a certain amount of power during use, but saving power consumption is not difficult. As long as we can master some corresponding knowledge of power saving, we can save a lot of power in the future. Here are some power saving tips:

"This house should be well insulated, and good insulation can prevent excessive heat loss. There should be no obvious gaps between doors and windows. If double layer central control glass is installed on the windows, the wall insulation is good, and the energy-saving effect will be significant.".

2. Make reasonable use of peak and valley power, and use valley power at night. The temperature of the electric steam furnace rises slightly. During the day, it is even possible to use a heat storage tank for peak power consumption.

"The power configuration should be reasonable. The power configuration is too large or too small, and the power configuration is too large, but not as large as the power configuration. The power configuration is too small, and it works until the set temperature, but always fails to reach the set temperature. This is because the heat charged into the room by the electric steam furnace is less than the loss of indoor heat, and the room temperature rises slowly and inconspicuously, wasting electrical energy, and the electric steam cannot produce a comfortable heating effect.".

4. When people are away from home, they run at low temperatures and have thermal inertia. They cannot immediately warm up when they are turned on, nor can they immediately cool down when they are turned off. When people are not at home, they can turn down the temperature instead of turning off the system, or they can turn off when they are away for a long time.

Before using an electric steam furnace, we need to master some knowledge of power saving, power saving, and power consumption reduction. In addition to these, when not in use, we must cut off the power supply to prevent excessive power consumption.

That's all for today's explanation. Thank you for watching. If you need to purchase electric steam furnaces, you can consult our company.

 

Transen

We specialize in the research and development and production of clean heating products such as solid electric energy storage heating devices, high-voltage electrode boilers, air waste heat recovery machines, electric coal substitutes, wind power heating, and peak shaving.

Contact

Add: No. 2-2 Songlan Street, Jinzhou District, Dalian City, Liaoning Province, China

Tel: +86-411-39241918

Email: master@dltransen.cn


Copyright © 2022 Dalian Transen Technology Co.,Ltd. | SEO | Business License | Powered by 300.cn